สินค้าใหม่
HIP P8 OUTDOOR LED DISPLAYS
- Model : P8
- กลุ่มสินค้า : LED Display หมวดสินค้า : Led Display
• The front LED Module must be coated to prevent water and moisture.
• LED Module on the back must be coated with Silicone Conformal Coating to prevent corrosion of the copper wire of the electrical circuit (PCB Board).
• LED Cabinet is square. Not less than 960 mm. x 960 mm. with a number of LED Modules arranged in a grid of not less than 18 Modules per one Cabinet.
• Products are certifed to IS09001:2015, ISO45001:2018, CE, FCC
Specification
| Pixel Pitch | 8mm |
| Pixel Structure | 1R1G1B |
| Pixel Density | 15625/m2 |
| Module Resolution | 40(W)*20(H) |
| Box Size | 1280*1280mm |
| Module Size | 320*160mm*12.8mm |
| Single Point Luminance, Chromaticity Correction | Have |
| White Balance Brightness | ≥6000cd/m |
| Color Temperature | 3200K-9300K adjustable |
| Horizontal Viewing Angle | ≥160° |
| Vertical Viewing Angle | ≥140° |
| Resolution | ≥97 Pixel/cabinet |
| Colour | 16.7 Million |
| Visible Distance | ≥16 meters |
| Brightness Uniformity | ≥97% |
| Contrast | 3000:1 |
| Signal Processing Bits | 16 bits*3 |
| Grayscale | 16Bit |
| Control Distance | Gigabit Ethernet cable: 100 meters, Optical fber : 10 kilometers |
| Drive Mode | High gray-scale constant current source driver IC |
| Frame Rate | ≥60HZ |
| Refresh Rate | ≥1920HZ |
| Control Method | Synchronize |
| Brightness Adjustment Range | 0 to 100 stepless adjustment |
| Continuous Working Time | ≥72 hours |
| Typical Life | 50,000 hours |
| Protection Class | Front IP65, back IP43 |
| Range Of Working Temperature | -20 C° to 60 C° |
| Operating Humidity Range | 10 %- 80% RH non-condensing |
| Storage Temperature Range | -20 C° to 60 C° |
| Operating Voltage | DC 5V |
| Power Requirements | AC: 220x(1+10%)V, 50x(1+5%)Hz |
| Maximum Power Consumption | 600W/m2 |
| Average Power Consumption | 300W/m2 |
Description
จอ LED จอโฆษณา ประชาสัมพันธ์ ครบวงจร แม้เปลี่ยนสื่อโฆษณากี่ครั้งก็ไม่มีค่าใช้จ่าย สำหรับธุรกิจ ป้ายโฆษณาดิจิทัล ที่เจ้าของธุรกิจไว้ใจ สำหรับใช้งาน ภายนอกอาคาร
- It has an environmental protection level of not less than IP65 or better.
- The material used to make the Display Module box is made of aluminum frame sprayed with black epoxy. resistant to corrosion and scratching, and has UV protection.
- LED Chip arranged in a Matrix grid. The LED lamp can be used outside (Outdoor Type) wrapped with Optical Grade Epoxy, a type that prevents UV light, can be used outdoors. in high-temperature environments, and the LEDs used must come from the high-standard manufacturers currently in use. which must be certifed with at least the international standard IS09001 and must have a copy of the document showing the standard certification from the manufacturer
- Properties of LED Lamp (Pixel Confguration) Each dot uses the principle of mixing lamp's color, including Red LED, Green LED and Blue LED.
- The LED lamp used must be a Surface Mount Device (SMD) type.
- The service life of LED lamps is not less than 10,000 hours at a temperature of +25C.
- Operating temperature is good in the temperature range of -20 to +60 degrees Celsius.
- LED Cabinet can display resolution (Resolution) not less than 96 Pixel (dot) in the long and high sides per 1 Cabinet.
- The maximum number of colors that can be displayed is not less than 16.7 million colors.
- Has a brightness level of not less than 6000 NIT (brightness per square meter) can be seen clearly.
- Have a horizontal view of not less than 160 degrees and vertical not less than 140 degrees.
- Have a clear vision distance in the minimum feld of view of 10 meters
- It can be used with AC220 Volt voltage and the power supply is Switching Power Supply Output.
- Has a maximum power consumption rate of not more than 600W/Sqm (Watts/Sq.m.) and an average power consumption rate of 300W/Sqm.
ดาวน์โหลดโปรแกรม
สามารถทำการดาวน์โหลดไฟล์โปรแกรมและคู่มือการใช้งานกับเครื่องรุ่น HIP P8 OUTDOOR LED DISPLAYS ได้เลยนะคะ..