Page 236 - Cover Front - Back

P8 Outdoor LED Displays

P8 OUTDOOR LED DISPLAYS
1. The front LED Module must be coated to prevent water and moisture.
2. LED Module on the back must be coated with Silicone Conformal Coating to prevent corrosion of the
copper wire of the electrical circuit (PCB Board).
3. It has an environmental protection level of not less than IP65 or better.
4. The material used to make the Display Module box is made of aluminum frame sprayed with black
epoxy. resistant to corrosion and scratching, and has UV protection.
5. LED Chip arranged in a Matrix grid. The LED lamp can be used outside (Outdoor Type) wrapped with
Optical Grade Epoxy, a type that prevents UV light, can be used outdoors. in high-temperature
environments, and the LEDs used must come from the high-standard manufacturers currently in use.
which must be certified with at least the international standard IS09001 and must have a copy of the
document showing the standard certification from the manufacturer
6. Properties of LED Lamp (Pixel Configuration) Each dot uses the principle of mixing lamp's color,
including Red LED, Green LED and Blue LED.
7. The LED lamp used must be a Surface Mount Device (SMD) type.
8. The service life of LED lamps is not less than 10,000 hours at a temperature of +25C.
9. Operating temperature is good in the temperature range of -20 to +60 degrees Celsius.
10. LED Cabinet is square. Not less than 960 mm. x 960 mm. with a number of LED Modules arranged in
a grid of not less than 18 Modules per one Cabinet.
11. LED Cabinet can display resolution (Resolution) not less than 96 Pixel (dot) in the long and high sides
per 1 Cabinet.
12. The maximum number of colors that can be displayed is not less than 16.7 million colors.
13. Has a brightness level of not less than 6000 NIT (brightness per square meter) can be seen clearly.
น น�า�า
14. Have a horizontal view of not less than 160 degrees and vertical not less than 140 degrees.
15. Have a clear vision distance in the minimum feld of view of 10 meters
16. It can be used with AC220 Volt voltage and the power supply is Switching Power Supply Output.
17. Has a maximum power consumption rate of not more than 600W/Sqm (Watts/Sq.m.) and an
average power consumption rate of 300W/Sqm.
18. Products are certifed to IS09001:2015 , ISO45001:2018 , CE , FCC
ISSUE 11 | 2023 - 2024
229